Lightweight Agitator, Hard Metal Dewatering Pump
- Lightweight, Hard Metal Dewatering Pump
- Designed for dewatering sand, silt, coal fines and abrasive light slurries
- Built-in agitator mixes settled solids with pump water to restore sump or basin volume
- Hardened ductile iron agitator and volute
- Chrome iron impeller and wear plate
- Max solids .4”
- Jacketed pumps cooled by pumped liquid
- 2 pole motor design
- Top discharge
- 2HP – 10HP
| Model | Datasheet & Curves | Motor Rating | Voltage | Phase Frequency | Full Load Amps | Discharge | Weight | Max Head | Max Flow | Max Solids |
|---|---|---|---|---|---|---|---|---|---|---|
| LWAE15 |
Download IFS-BJM-LWAE15-datasheet.pdf
| 2hp | 230/460/575 | 3ph-60Hz | 6.1/3.1/2.5 | 3"NPT | 130 lbs | 50' | 210 GPM | .4" |
| LWAE22 |
Download IFS-BJM-LWAE22-datasheet.pdf
| 3hp | 230/460/575 | 3ph-60Hz | 8.6/4.3/3.5 | 3"NPT | 135 lbs | 61' | 255 GPM | .4" |
| LWAE37 |
Download IFS-BJM-LWAE37-datasheet.pdf
| 5hp | 230/460/575 | 3ph-60Hz | 13.8/6.9/5.5 | 3"NPT | 150 lbs | 92' | 245 GPM | .4" |
| LWA55 |
Download IFS-BJM-LWA55-datasheet.pdf
| 7.5hp | 230/460/575 | 3ph-60Hz | 18.7/9.3/7.4 | 4" NPT | 230 lbs | 88' | 494 GPM | .4" |
| LWA55H |
Download IFS-BJM-LWA55H-datasheet.pdf
| 7.5hp | 230/460/575 | 3ph-60Hz | 18.5/9.2/7.4 | 3"NPT | 230 lbs | 123' | 315 GPM | .4" |
| LWA75 |
Download IFS-BJM-LWA75-datasheet.pdf
| 10hp | 460/575 | 3ph-60Hz | 12.8/10.2 | 6" NPT | 225 lbs | 85' | 670 GPM | .4" |
| LWA75H |
Download IFS-BJM-LWA75H-datasheet.pdf
| 10hp | 460/575 | 3ph-60Hz | 12.8/10.2 | 4" NPT | 220 lbs | 117' | 475 GPM | .4" |
Total: 7 products
