Compliant, on-time medical and pharma production
Corrosive chemicals, sterilization runoff, and flushed wipes destroy standard wastewater pumps in hospitals and pharmaceutical plants faster than most facility managers expect. Industrial Flow Solutions manufactures corrosion-resistant, non-clog submersible wastewater pumps for the medical industry that stand up to the harshest effluent conditions and keep operations running without costly emergency maintenance calls.
Pharmaceutical and Medical Wastewater Pumps for Your Toughest Challenges
Medical and pharmaceutical facilities generate some of the most demanding wastewater in any industry. Industrial pumps for the pharmaceutical industry must handle conditions that standard equipment simply cannot survive.
Facility engineers turn to IFS pharmaceutical wastewater pumps for applications including:
- Sewage ejection systems in hospitals and medical office complexes
- Chemical wastewater removal from pharmaceutical manufacturing lines
- Sterilization and disinfectant runoff collection
- Solids handling in high-traffic patient care facilities
- Hazardous effluent management at biotech and medical device plants
- Dewatering during facility construction and expansion projects
Why Medical and Pharmaceutical Facilities Face Unique Wastewater Pump Failures
Pharmaceutical wastewater carries aggressive solvents, acids, and cleaning agents that eat through cast iron and standard steel components in months. Hospitals compound the problem with massive volumes of so-called flushable wipes, sanitary products, and surgical waste that wrap around impellers, block screens, and burn out submersible motors.
Unfortunately, these failures rarely happen once. Without the right pharmaceutical industry pump in place, facilities face a cycle of recurring clogs, emergency service calls costing thousands per incident, and unplanned downtime that disrupts critical operations.
If your Concerns in Pharmaceutical and Medical Applications Include:
- Clean-in-Place
- Autoclave blowdown
- Transport corrosive liquids and chemicals
- Ability to cut, shred, or pass solids
- Environmental, Health, and Safety compliance
- Containment of hazardous materials
Industrial Flow Solutions Offers the Following Pump and Control Solutions:
- Corrosion resistant, 316 stainless steel pumps
- High temperature capability (up to 200°F continuous duty)
- Dual shredding (Radial + Axial) designed to cut, shred, or shear to expedite flow
- FM Approved Class I, Division 1, Groups C & D
- Corrosion- and abrasion-resistant, solids-handling, non-clog, and dewatering pumps
Recommended Products For This Industry
Perfecta® Series
- Lightweight, corrosion resistant, non-metallic dewatering pump
- Compact and highly durable
SS Series
- Corrosion-resistant, 316 stainless steel solids handling wastewater pump
- 316 stainless steel construction, FKM elastomers
- Non-clogging vortex impeller
SXF Series
- Fahrenheit® HIGH TEMPERATURE, corrosion-resistant, solids-handling non-clog pump
- High temps up to 200°F (93°C)
- Non-clog impellers, max solids 2.5”
XP-JX Series
- EXPLOSION PROOF JX series
- Corrosion-resistant, dewatering pump
- Cast 316 stainless steel (ASTM 48) wet end, no welds
Pharmaceutical and Medical Wastewater Pumps for Your Toughest Challenges
Medical and pharmaceutical facilities generate some of the most demanding wastewater in any industry. Industrial pumps for the pharmaceutical industry must handle conditions that standard equipment simply cannot survive.
Facility engineers turn to IFS pharmaceutical wastewater pumps for applications including:
- Sewage ejection systems in hospitals and medical office complexes
- Chemical wastewater removal from pharmaceutical manufacturing lines
- Sterilization and disinfectant runoff collection
- Solids handling in high-traffic patient care facilities
- Hazardous effluent management at biotech and medical device plants
- Dewatering during facility construction and expansion projects
Corrosion-Resistant Pumps for Pharmaceutical and Medical Wastewater
Standard cast iron pumps deteriorate rapidly when exposed to the acidic and solvent-heavy wastewater common in pharmaceutical manufacturing.
IFS builds medical corrosion-resistant pumps using 316 stainless steel construction and FKM elastomers that resist chemical breakdown and extend pump life significantly. For facilities managing lighter chemical loads, the Perfecta® Series offers a non-metallic, lightweight alternative that eliminates metal corrosion entirely.
Every pharmaceutical corrosion-resistant pump in the IFS lineup pairs material durability with non-clog impeller technology, so chemical resistance never comes at the expense of solids-handling performance.
A Pharmaceutical Wastewater Pump Partner With Application Expertise
IFS applications engineers work directly with facility teams to match pump specifications to exact wastewater conditions, including chemical composition, solids content, temperature, and flow demands.
Every pharmaceutical industry pump ships from the IFS New Haven, Connecticut headquarters, where an in-house testing facility built to Hydraulic Institute Standards validates performance before equipment reaches your site.
Talk to Our Applications Engineers About Your Pharmaceutical Wastewater Pump Needs
Finding the right wastewater pumps for the medical industry starts with a conversation. Tell us about your facility, your challenges, and your requirements, and our team will recommend a solution matched to your exact application.
array(7) {
["id"]=>
int(1262)
["gated"]=>
bool(false)
["title"]=>
string(70) "IFS-BJM-SK Series Hospital Facing Chronic Clogging- Case Study 08.2025"
["excerpt"]=>
string(853) "Cutting Clogs and Cutting Costs: Shredder pumps reduce costly maintenance calls at medical center. Pomona Valley Hospital Medical Center (PVHMC) employs 2400 physicians and nurses and features 437 hospital beds. It relies on 7 sewage ejection pits to collect waste from the hospital complex and pump waste materials into the municipal sewer system. Like many other hospitals, PVHMC was having problems with “disposable” wipes. The wastewater pumps consistently clogged with both wipes and other non-flushable items. The hospital regularly brought in additional maintenance staff to clear the ejection pits, costing $4500 - $8500. Read how PVHMC replaced the pump system with BJM® SK series solids-handling pumps that met two key selection criteria: (1) shred flushed solids; (2) be extremely reliable to avoid additional maintenance expenses."
["show_full_excerpt"]=>
bool(false)
["url"]=>
string(144) "https://flowsolutions.com/resources/cutting-clogs-and-cutting-costs-shredder-pumps-reduce-costly-maintenance-calls-at-medical-center-case-study/"
["download"]=>
string(126) "https://flowsolutions.com/wp-content/uploads/2020/09/IFS-BJM-SK-Series-Hospital-Facing-Chronic-Clogging-Case-Study-08.2025.pdf"
}
IFS-BJM-SK Series Hospital Facing Chronic Clogging- Case Study 08.2025
Cutting Clogs and Cutting Costs: Shredder pumps reduce costly maintenance calls at medical center. Pomona Valley Hospital Medical Center (PVHMC)…
FAQs About Wastewater Pumps for the Medical Industry
What makes pharmaceutical and medical wastewater different from standard wastewater?
Pharmaceutical wastewater contains concentrated solvents, acids, disinfectants, and active pharmaceutical ingredients that create highly corrosive conditions. It also frequently carries solid waste like flushed wipes and surgical materials that cause mechanical failures in standard pumps.
Why do hospitals and pharmaceutical plants need corrosion-resistant pumps?
Chemical exposure breaks down cast iron and standard steel components quickly, leading to frequent replacements and unplanned downtime. Medical corrosion-resistant pumps built with 316 stainless steel or non-metallic materials last significantly longer in these environments.
How do I select the right pharmaceutical wastewater pump for my facility?
Start by contacting the Industrial Flow Solutions engineering team! They evaluate your specific wastewater chemistry, solids content, flow rates, and temperature to recommend the right pump configuration for your operation.
Does Industrial Flow Solutions test pumps before shipping them?
Yes! We test every pharmaceutical industry pump at the IFS in-house facility, built to Hydraulic Institute Standards, before leaving the headquarters.