XP-JXH Series
- Explosion proof, corrosive resistant, high head, dewatering pump
- HIGH HEAD up to 112’
- FM-approved explosion proof motor
- Meets NFPA (70), NEC, OSHA requirements for Class I, Division 1, Group C & D hazardous locations (temp. code T4)
- Cast 316 stainless steel (ASTM 48) wet end, no welds
- FKM Elastomers (EPDM or Buna Optional)
- Double mechanical seal design with separate lip seal
- Seal Minder® moisture detection system
- Solids capability up to 3/8”
- Built in thermal protection
- Class F motor insulation
- Side discharge
- 2 pole motor
- 2HP – 5HP
| Model | Datasheet & Curves | Motor Rating | Voltage | Phase Frequency | Full Load Amps | Discharge | Weight | Max Head | Max Flow | Max Solids |
|---|---|---|---|---|---|---|---|---|---|---|
| XP-JX15HSS |
Download IFS-BJM-XPJX15HSS-datasheet.pdf
| 2hp | 208/230/460/575 | 3ph-60Hz | 6.2/3.1/2.5 | 2" NPT-F | 215 lbs | 75' | 105 GPM | 3/16" |
| XP-JX22HSS |
Download IFS-BJM-XPJX22HSS-datasheet.pdf
| 3hp | 208/230/460/575 | 3ph-60Hz | 9.4/8.9/4.5/3.6 | 2" NPT-F | 230 lbs | 95' | 150 GPM | 3/8" |
| XP-JX37HSS |
Download IFS-BJM-XPJX37HSS-datasheet.pdf
| 5hp | 208/230/460/575 | 3ph-60Hz | 15/13.9/7/5.6 | 2" NPT-F | 260 lbs | 113' | 192 GPM | 3/8" |