The government required a Federal Courthouse in Phoenix, Arizona to replace its aging pneumatic injector system. The courthouse required a solution that would eliminate odors, reduce maintenance, and…
BJM Pumps® - Cutting Costs and Clogs: Poultry Processor Replaces AODD Pumps with Reliable Solids Handling Pumps
A major poultry plant in Gainesville, Georgia, processes 2 million chickens per week. During production, chicken blood, feathers, and entrails collect in sumps beneath the conveyor lines. The…
BJM Pumps® - Reliable Offal Management: Submersible Shredder Pumps Replace AODDs at Arkansas Plant
A major chicken processing plant in northwest Arkansas, part of one of the world’s largest meat processors, produces millions of pounds of meat each week and needed a…
OverWatch® - Solving Waste Challenges in Olive Oil Production with OverWatch
A California olive oil producer struggled with managing waste from production and chose OverWatch Direct In-Line Pump to solve the problems.
OverWatch® - Quiet, Clean, and Cost-Effective: OverWatch a Better Pumping Solution for a Residential Neighborhood in France
The municipality required a solution to eliminate noise and odors, enhancing the environment for all visitors.
OverWatch® - Sustainable Pumping in a Protected Coastal Environment: OverWatch Installed to Eliminate Odors & Hazards
The municipality required a temporary lift station that could later be relocated and used as a permanent upstream pumping solution and chose OverWatch as the permanent solution.
OverWatch® - Water Park’s Experience Enhanced: OverWatch Eliminates Noise and Odor
The municipality required a solution to eliminate noise and odors, enhancing the environment for all visitors.
OverWatch® - Restoring Quality of Life in Fontainhas: OverWatch Solves Odor and Maintenance Issues
A sewage pumping station equipped with three submersible pumps had long been in need of rehabilitation. They chose OverWatch to solve their problems.
OverWatch® - Transforming Boston Hospital's Wastewater System: The Benefits of Direct In-Line Pump Technology
A Boston hospital faced persistent operations interruptions with its wet well sewage ejector system. The hospital implemented an OverWatch® Direct In-Line Pump System, to eliminate the wet well.
DERAGGER® - Eliminating Pump Ragging and Belt Failures: The DERAGGER® Solution for Belt-Drive Pumps in Arkansas
At a wastewater facility in Arkansas, frequent pump clogging and “ragging” caused excessive belt wear, leading to replacements multiple times each month. To address the issue, the facility…
DERAGGER® - Solving Vibration Issues on an Aeration Mixer with DERAGGER®: Reducing Vibration, Current, & Energy Costs
Pasco County, Florida, recently completed an upgrade of a 4-lane Aeration Basin that serves a population of 7,800 residents. A DERAGGER® was installed on one mixer as part…
DERAGGER® - Improving Safety, Efficiency, and Sustainability: DERAGGER Solution in Los Angeles, CA.
The pump station on Western Avenue in Los Angeles, CA, was equipped with two 50HP pumps that frequently experienced ragging and clogging. The municipality’s local supplier recommended installing…
DERAGGER® - Eliminating Pump Ragging and Reducing Energy Costs in Mount Juliet, TN
Mount Juliet, TN, located in the Nashville Metro area, faced a recurring issue with one of its duplex lift stations, which experienced weekly pump clogs. The municipality decided…
DERAGGER® - Enhancing Pump Performance and Cutting Costs: DERAGGER Solution in Great Falls
Great Falls, MT USA wastewater facility struggled with pump ragging & frequent clogs. The municipality installed a DERAGGER®. Read the case study to learn more.
OverWatch® - Pumping Up Efficiency: How Direct In-Line Pumping Transformed University Operations
A university in Connecticut encountered persistent issues with its submersible wastewater pump system, which serviced kitchens and public restrooms. To address the persistent issues with the wastewater management…
OverWatch® - Streamlining Sewage Solutions: OverWatch® solves persistent challenges at a senior care facility
A rehabilitation and senior care center in North Wales, Pennsylvania, faced persistent challenges with its sewage pumping system. The combination of mechanical failures, high maintenance costs, and potential…
DERAGGER® - From Frequent Failures to Financial Savings: Solving Ragging Issues in Half Moon Bay’s Pump Station with DERAGGER®
A pump station in Half Moon Bay, CA USA suffered from frequent ragging causing downtime and unsafe working conditions for the staff. To address the persistent ragging problem,…
DERAGGER® - From Clogs to Continuous Operation: Enhancing Pump Performance in Lake Worth with DERAGGER®
The City of Lake Worth, with a population of 37,000 residents, faced significant operational challenges due to a 400HP (300kW) pump. In June 2014, they implemented DERAGGER® to…
OverWatch® - Overcoming Aging Infrastructure Challenges: The Upgrade of Franklin’s Wastewater Technology to OverWatch®
Franklin, MA relied on a pneumatic ejector system to manage wastewater. However, the system reached the end of its life, and they needed a robust, sustainable replacement that…
OverWatch® - Navigating Troubled Waters: A Resilient Revamp for Emergency Pump Operations in El Paso County
The El Paso team strategically enhanced its operational infrastructure by adopting the OverWatch® Direct In-Line Pump System. Read the case study to learn more.
BJM Pumps® - Mining the benefits: Upgrading solids-handling slurry pumps at silica proppant mining facility
Upgrading solids-handling slurry pumps at silica proppant mining facility with BJM Pumps KZN Series heavy-duty abrasion resistant pumps.
BJM Pumps® - Rebuilding Galveston’s Seawall: LWA® Series Pumps Support Hurricane Recovery in Texas
After Hurricane Ike devastated southeast Texas in 2008, Galveston Island’s seawall was damaged. The construction team needed to source submersible dewatering pumps to handle the heavy workload, and…
OverWatch® - Clogged AOD pumps plague a Wastewater Plant in a large municipality in Georgia
The plant needed a pump system capable of handling dirt, grit, and debris while maintaining sufficient capacity/flow for optimal pump performance, despite power outages and chose OverWatch Direct…
DERAGGER® - City plunges forward, flushing problems away and saving over $100,000 in 8 months
"Flushables" were clogging pumps daily in the sewer system in Palestine, Texas a city of over 18,000 residents that processes 25 MGD. Read the full case study to…
DERAGGER® - Efficient Pump Protection and Enhanced Safety Deliver Rapid ROI for Greensboro’s Wastewater Team
Pump ragging was a regular problem for the wastewater team at the City of Greensboro, NC, with over 285,000 residents, processing over 30MGD.
DERAGGER® - Eliminating Pump Lifting Saves South Jordan Pump Station Over $9,000 in the First Year
The South Jordan Pump Station installed four DERAGGER® systems and keypads in 2016. By enabling Real Time Pump Protection™ to detect rags and run a clean cycle, DERAGGER®…
Stancor® - Critical Water, On Demand: Reuse System for Airport Firefighting Facility uses P/S series submersible dewatering pumps
Stancor P/S Series Heavy-duty dewatering pumps were installed in a rainwater and reuse collection system.
BJM Pumps® - Steel plant saves over $80,000 by switching to KZE Series pumps
The original pumps failed four times in the first year following reconstruction, due to both abrasion damage and to running out of curve which led to cavitation. Steel…
OverWatch® - "Flushable" wipes plagued a high-rise until an OverWatch Direct In-Line Pump System was installed
In Austin, TX, a 23-story, 320-unit high rise residence building with a grocery store and restaurant was plagued by frequent pump clogs, 6 faults in 2 months! The…
OverWatch® Direct In-Line Pump System Enhances Efficiency for Pet Food Manufacturer’s Expansion
A leading manufacturer of pet food products selects OverWatch® to support growing production needs. The OverWatch Direct In-Line Pump System solved all the challenges.
OverWatch® Direct In-Line Pumping System solves sewage backup and overflow issues for luxurious harbor-side residence in Baltimore
A luxury Baltimore residence faced constant overflow issues with their sewage pump. The Overwatch® Direct In-Line Pumping system prevented future inconveniences.
OverWatch® - Transforming Troubles: How Sherman, NY Overcame Pumping Challenges with OverWatch®
A village in New York faced costly clogging of its waste pump. OverWatch® Direct In-Line Pumping eliminated the need for constant maintenance.
OverWatch® Direct In-Line Pump: A Cost-Effective Solution to Replace Aging Pneumatic Ejector in New Jersey Lift Station
A New Jersey town's pneumatic ejector struggled with missing replacement parts. OverWatch® Direct In-Line Pumping directly replaced the parts, keeping it running.
BJM Pumps® - Fahrenheit® & RAD-AX® Technology Unclogs Utz® Potato Chip Production
An Utz® potato chip producer in Denver searched for a pump to reduce costs and maintenance. With a BJM SKGF Series pump, production efficiency improved.
BJM Pumps® - Shredding Wipes & Cutting Costs: SK Series Pumps Keep Hospital Sewage Flowing
Pomona Valley Medical Center faced costly maintenance with their waste water pump system. SK Series solids handling pump by BJM Pumps saved them time and money.
BJM Pumps® - Shredder Pump Saves Thousands of Dollars at Dairy Plant
United Dairy plant saved thousands of dollars replacing their sump pumps with BJM high temperature submersible shredder pumps.
BJM Pumps® - From Failures to Reliability: High-Temp Shredder Pumps Boost Juice Mill Operations
A Florida-based juice production facility grows and processes oranges to yield 90 million gallons of fresh orange juice every year. As one of the largest suppliers of Florida…
Stancor® - Reliability Under Pressure: Stancor Pumps Meet Demands of Massive Bridge Project
With new Stancor high head dewatering P/S Series pumps, Tappan Zee Bridge construction continued smoothly.
BJM Pumps® - Brewing Reliability: High-Temperature Pumps Keep Brewery Wastewater Flowing
A brewery needed a wastewater pumping system to meet new demands. The BJM SXF Series submersible high temperature pump effectively managed the challenge.