CTUV / CSA Pumps - Industrial Flow Solutions

Showing all 25 results

KZN Series
- Abrasion-resistant solids-handling pump
- Heavy duty, high-chrome agitator for sand/ sludge/ slurry applications
- Double silicon carbide mechanical seals
Series Details
SS Series
- Corrosion-resistant, 316 stainless steel solids handling wastewater pump
- 316 stainless steel construction, FKM elastomers
- Non-clogging vortex impeller
Series Details
JXH Series
- CORROSION-RESISTANT, high head (140’) dewatering pump
- Cast 316 stainless steel, no welds
- Solids capability <3/8”
Series Details
AHS Series
- Non-clog electrical submersible wastewater pump
- Abrasive resistant, Hytrel-resin vortex impeller
- Hardened steel agitator, die cast aluminum body
Series Details
J Series
- Cast iron effluent general sump dewatering pump
- High flow <650 GPM
- Solids capability up to 3/8”
- 304 stainless steel motor housing
Series Details
JH Series
- HIGH HEAD (<140’) general sump dewatering pump
- Cast iron construction
- Solids capability up to 3/8”
Series Details
JX Series
- CORROSION RESISTANT, high flow (<650GPM) dewatering pump
- Cast 316 stainless steel
- Solids handling <3/8”
Series Details
KB Series
- Heavy duty hard metal wastewater drainage pump with agitator
- Wastewater removal in sand/slurry/sludge applications
- Hard metal components
Series Details
LWA Series
- Lightweight hard metal agitator dewatering pump
- Designed for dewatering sand, silt, coal fines and abrasive light slurries
- Max solids:0.4” (sand, silt, coal fines and abrasive light slurries)
Series Details
P/S Series
- Heavy duty, dewatering pump with cast 356 T6 aluminum motor housing
- Stainless steel handle and discharge connection
- Wear-resistant, nitrile rubble/wear plates.
Series Details
R Series
- Small, low HP range dewatering pump
- Robust cast iron construction
- Top discharge, slim line design
Series Details
RX Series
- Portable, corrosion-resistant dewatering pump
- Cast 316 stainless steel (ASTM 48), no welds
- Motor cooling feature for low level liquid applications
Series Details
S Series
- Solids-handling wastewater pump
- Dual vane impellers
- 304 stainless steel motor housing
Series Details
SB Series
- Cleanwater dewatering pump
- Double mechanical seal
- ABS + fiberglass impeller
Series Details
SC Series
- Shredding/cutting solids handling pump
- Cast iron impeller with tungsten cutter edge
- Ideal for wastewater treatment and ground
Series Details
SE/SV Series
- Non-clog solids handling wastewater pump
- Cast iron, vortex impeller
Series Details
SEW Series
- Heavy-duty, non-clog solids handling wastewater pump
- Cast iron pump with recess vortex impeller to pass 2‐inch solids
Series Details
SG Series
- Grinding solids handling wastewater pump
- Heavy-duty, cast iron construction
- Chrome impeller and shredding ring
Series Details
SK Series
- Solids-handling non-clog pump
- Shredding/cutting solids up to 3.5”
- Cast iron and 304 stainless steel
Series Details
SKG Series
- Patented dual-shredding RAD-AX® (cut/ /shear) technology solids handling pump
- Prevents clogs <10% solids (by volume)
- Hardened 440C stainless steel cutting elements
Series Details
SKX Series
- CORROSION-RESISTANT 316 Stainless steel shredding/cutting solids handling pump
- Designed to tear, break, rip solids
- Max solids <3.5”
Series Details
SL Series
- Low suction, cleanwater dewatering pump
- Pumps down to 1/8”
- Abrasive resistant, Hytrel-resin vortex impeller
Series Details
SSD Series
- Economical general-purpose dewatering pump
- Stainless outer casing w/ Abrasive resistant, Hytrel resin
- Semi-open impeller
Series Details
SV Series
- Non-clog, solids handling pump with vortex impeller
- Non-clog design for sewage, viscous liquids, rags, effluent water
Series Details
SX Series
- CORROSION-RESISTANT solids-handling non-clog pump
- 316 stainless steel (ASTM 48)
- Max solids 2.5”
Series Details